Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: x1-error on naza-m

  1. #1

    x1-error on naza-m

    I changed frames and I tried to keep the wiring in order but it seems like something is majorly wrong.
    I bought the fpv frame from hoverthings and I had the time to rebuild yesterday/last night. EVERYTHING is fine except when I power up the rx light looks half lit and in the naza assistant x1-error pops up. I've spent hours troubleshooting and backtracking to make sure I didn't miss something but I have found nothing I've done makes a change. My rx is a spektrum ar-6100e. As soon as the battery gets plugged in the rx lights up brightly at first and then it dims in a sec. after the naza vu boots it flashes red/rapid.
    I'm at a loss, I'm not sure if my rx is shot or if it could be something different.

    can someone help me? Thanks!
    Lets get airborne and have safe fun!
    HT-FPV quad with NAZA-m and GPS, Gopro hero3gimbal, 500mw a/v tx/rx, screw planar antennas, AR8000 rx
    Spektrum Dx7s 9" LCD monitor, 3200mAh, 5300mAh lipos
    Eagle 50 with oem parts and Wk-2602
    Eagle 50 with turnigy motors and ESCs, super skidz, & Wk-2601- parts only
    Heli-Max 1SQ MICRO QUAD, DoubleHorse 9101 and Traxxas Grave Digger for my wife.

  2. #2
    Legendary Member Ghostrydyr's Avatar
    Join Date
    Nov 2011
    Location
    EAST COAST
    Posts
    3,726
    looks like its not recognizing the tx,assuming all the wires are correct have you tried to rebind the tx/rx??

  3. #3
    yes I have and I'm totally willing to try several more times.
    Lets get airborne and have safe fun!
    HT-FPV quad with NAZA-m and GPS, Gopro hero3gimbal, 500mw a/v tx/rx, screw planar antennas, AR8000 rx
    Spektrum Dx7s 9" LCD monitor, 3200mAh, 5300mAh lipos
    Eagle 50 with oem parts and Wk-2602
    Eagle 50 with turnigy motors and ESCs, super skidz, & Wk-2601- parts only
    Heli-Max 1SQ MICRO QUAD, DoubleHorse 9101 and Traxxas Grave Digger for my wife.

  4. #4
    I'm gonna call Spektrum and ask about the light being dim, it concerns me.
    Lets get airborne and have safe fun!
    HT-FPV quad with NAZA-m and GPS, Gopro hero3gimbal, 500mw a/v tx/rx, screw planar antennas, AR8000 rx
    Spektrum Dx7s 9" LCD monitor, 3200mAh, 5300mAh lipos
    Eagle 50 with oem parts and Wk-2602
    Eagle 50 with turnigy motors and ESCs, super skidz, & Wk-2601- parts only
    Heli-Max 1SQ MICRO QUAD, DoubleHorse 9101 and Traxxas Grave Digger for my wife.

  5. #5
    Legendary Member Ghostrydyr's Avatar
    Join Date
    Nov 2011
    Location
    EAST COAST
    Posts
    3,726
    did you download the usb driver,,http://www.dji-hobby.com/naza/index_en.htm

  6. #6
    I don't thunk I did. I'll check and add if necessary. Thanks
    Lets get airborne and have safe fun!
    HT-FPV quad with NAZA-m and GPS, Gopro hero3gimbal, 500mw a/v tx/rx, screw planar antennas, AR8000 rx
    Spektrum Dx7s 9" LCD monitor, 3200mAh, 5300mAh lipos
    Eagle 50 with oem parts and Wk-2602
    Eagle 50 with turnigy motors and ESCs, super skidz, & Wk-2601- parts only
    Heli-Max 1SQ MICRO QUAD, DoubleHorse 9101 and Traxxas Grave Digger for my wife.

  7. #7
    I cannot access that site, it's asking for login and password.
    I guess I haven't downloaded that driver.
    Lets get airborne and have safe fun!
    HT-FPV quad with NAZA-m and GPS, Gopro hero3gimbal, 500mw a/v tx/rx, screw planar antennas, AR8000 rx
    Spektrum Dx7s 9" LCD monitor, 3200mAh, 5300mAh lipos
    Eagle 50 with oem parts and Wk-2602
    Eagle 50 with turnigy motors and ESCs, super skidz, & Wk-2601- parts only
    Heli-Max 1SQ MICRO QUAD, DoubleHorse 9101 and Traxxas Grave Digger for my wife.

  8. #8
    Legendary Member Ghostrydyr's Avatar
    Join Date
    Nov 2011
    Location
    EAST COAST
    Posts
    3,726
    Download the driver.

    Then unzip it..If you do not have the software to unzip a .rar type file then you can get a free trial version easily...let windows search for you it will find plenty of free options.

    Once you get the compressed folder open you will need to decide on 32 or 64 bit...this is specific to your PC.

    With the nasa plugged in and tx on go to

    Right click My Computer
    select Properties
    under the Hardware tab select Device manager


    .

    Basically remember to point the driver updater at a folder...so either 32 or 64 bit...not at a file as it does not recognize individual files.

  9. #9
    Legendary Member Ghostrydyr's Avatar
    Join Date
    Nov 2011
    Location
    EAST COAST
    Posts
    3,726
    the wires are,,Brown is Negative, the Red is Positive and the Orange is the Signal.

  10. #10
    THANKS Ghost

    I'm such a rookie.
    I wouldn't have come up with this on my own and that's why I'm glad to be a part of this forum. I threw the bind off by connecting (thr) incorrectly.... dim light on rx is a clear indicator of mal power. In my case I had the one tree pin connector backwards. I flipped it, re-binded and now its ready to try out the new body
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_0175[1].jpg 
Views:	24 
Size:	212.0 KB 
ID:	8042   Click image for larger version. 

Name:	IMG_0178[1].jpg 
Views:	23 
Size:	146.3 KB 
ID:	8043  
    Lets get airborne and have safe fun!
    HT-FPV quad with NAZA-m and GPS, Gopro hero3gimbal, 500mw a/v tx/rx, screw planar antennas, AR8000 rx
    Spektrum Dx7s 9" LCD monitor, 3200mAh, 5300mAh lipos
    Eagle 50 with oem parts and Wk-2602
    Eagle 50 with turnigy motors and ESCs, super skidz, & Wk-2601- parts only
    Heli-Max 1SQ MICRO QUAD, DoubleHorse 9101 and Traxxas Grave Digger for my wife.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •