Search:

hahahaha what a question

its cold and raining... I thought that seeing as kids seem to have this video game induced hand eye coordination advantage I shouldnt miss the boat so I got an Xbox...

Funny you should bring this up. There is a big discussion on the other board about proper blade balancing as well as a couple of people that do CG balance per blade and then balance the whole...

thats why I said dx7 if you were going to do blade stuff. a cp heli takes 6 channels and a nitro cp heli takes 7. You should keep in mind that the TH9x only has 8 channels, not 9 if you get the...

except maybe if you were going to use all blade products

Its a mixed bag. Heres a short overview
The stock firmware is ok. It is however upgradeable to use ER9x or one of its variants which is a firmware that offers alot of customization and features...

hmm time to replace your finger with a chicken stick!

sounds to me more like the bolts that hold the blade grips to the feathering shaft are loose. grab the grips and see if you can wiggle them up or down. if so the bolt is loose and \ or the bearing...

You should start with a sim and see if its for you, crashing is free on the sim. If you like it then you can talk about helis. Cheapest way to do this is the dynam simulator and then download marks...

There is an available bluetooth to serial board that lets you link bluetooth devices like your phone to a device and then turn the data into serial data on the car. Someone controls a robot with this...

jesus, knew i forgot something....
haha...

one way bearing slipping...

sounds like a control board issue. This is basically the same thing that the tarot zyx gyro does when it goes south.

backwards blade grips? the mount point for the control arm goes to the front.

My personal experience is that quality control for the TH9x is not so great. Its good for a while but when it starts to have issues it will put your heli in the dirt. I've got 2 TH9x radios, one with...

Ok, now we need Kaos to preach the Th9x... >:D

It has to do with the swash layout and if the radio does swash mixing for servo control. H1 is no mixing straight stick input to channel output. H3 and H3R are radio swash mixing and cover most...

I think there is an article over on helifreak on how to DIY this. You use the led strip tape to secure the lights to the blades with a power source around the blade root. This is for bigger birds...

I beleive that gives you a switch error, not an eeprom error though

on a 450 with a 150t main you are going to want a 12 or 13t pinion. It will be flyable with and 11t but not to sporty, less than that and I would not try and go inverted unless you are using a very...

might want to ask over in 9xforums.com

Gaui X5!!!!

I wouldnt worry about a sat rx on a 450 you are not dealing with a lot of frame size. To me this almost seems like 2 different issues. But for sure you should figure out what happens to the ZYX when...

BTW you might find this interesting

http://helifreak.com/showthread.php?t=474827
What FBL are you using poll
6747

Wow, now I see where this strange cross post started.... So why do you want to Delete account Evan? Moving to the city with no room to fly !

I don't know why so many people have an issue with this tech support. They are pretty busy and usually reasonable. When you connect LOOK at that time to wait estimate No one is going to answer your...