How to Use Mini (FPV) Camera

[paul]

Mini FPV Camera

First please make sure the Switch (Record vs Video) is on VIDEO. This swtich is More like a HOLD button on a CD player. When its on RECORD, the device is locked down.

The switch (ON vs OFF) should ALWAYS be set to OFF when you are charging and plugged into the USB wire.



First Time Use/Start up:

You will need to Format the Mini SD Memory Card for First time users. Switch to OFF, plug Camera to USB wire.
Once Plugged, you computer should recognize this device.

From 'My computer' or 'Computer' you will need to locate this "Removeable Storage Device", Please make sure that you have selected the Drive for the Mini FPV Camera.

Please 'Right Click' the Drive, a Menu will appear. Select 'Format', Under 'File System' Must Select 'FAT32', check 'Quick Format', and finally hit the 'Start' button.

Once the Format is complete then you will be ready to Record or take Pictures with your Mini FPV Camera.



Take Pictures/Record:

Turn Camera to 'ON' position.
Press down 'Circle/Square' button once, Red Light will blink, Picture will be taken.
Press down & hold for 3 seconds 'Circle/Square' button, Blue light will Blink, Camera is Recording. Hit the button again to turn off blinking Blue light.

To get to your saved data, you will need to plug the camera USB wire, locate that Drive on you 'Computer' and Open that drive like you would a 'Folder'.
Inside the drive there should be a Folder containing all your saved Data.