exceed dyamite motor no turning

[Longhorn]

My son has an exceed dynamite and all of a sudden when you pull the throttle it does nothing.  When you turn the esc on it beeps but it is not as loud as it use to be.  The steering on the remote works but when you pull the trigger for the throttle nothing happens.  The light on the esc lights up but nothing happens.  I did change the batteries in the transmitter. Any suggestions.

                                                  Thanks

[Smoothies]

Make sure the wires to your receiver didnt come loose, and also make sure your throttle trim is set to zero before you turn anything on.  Sometimes that will work.

[Longhorn]

Ok I will.  I was told by the online chat support that it sounds like the throttle servo may be out.  The problem is that he said that this truck has two servos one for throttle and one for steering.  I do not remember see two for this truck.  Do you know if this is right and is if possible for one servo to operate both?

[Longhorn]

Ok after being on hold I did get to talk to someone. He told me that it was going to be the esc which is what I first thought.  They said they would send me a new one even thought the truck was out of warranty.  This surprised me.  so far the customer service has been good once you can get through.