NEW TO LIPO BATTERYS ? ABOUT CHARGER AND RATES

[ck122]

IM  NEW TO THE BATTERY  POWERED HELIS BUT NOT NEW TO HELIS NEED SOME HELP HERE.
 OF THESE CHARGERS WHAT WOULD BE A GOOD ONE TO USE THEY ALL SEEM TO DO THE SAME AS THE OTHER
http://www.hobbypartz.com/thac6smbachw.htmlhttp://www.hobbypartz.com/60p-dyc-1003.html
http://www.hobbypartz.com/60p-dyc-1004.html
AND AS FOR CHARGE RATE IS IT THE SAME LIKE NICAD
2200MAH WOULD =2.2 AMPS OR DO I HAVE TO GO BY THE C RATE OF THE BATTERY??

[FireballXL5]

Thought we answered your charging question last time, c rate has nothing to do with the charge rate. 2200=2.2 charge rate, 1800=1.8 charge rate, unless your battery specifically says it can handle more. Any charger that goes up to 5amps is great for up to 3cell batts, I've heard if you are flying bigger heli's you may want a 10amp charger to cut your charge times down on the 4-6cell batts. The 5amp chargers will do this size battery, it just takes longer. Hope this helps square you away, and the brand of charger is just personal preference. 

[DLAN]

Those 2 chargers are almost the same in design and functions. The Dynam, which is the one I have, has no ac  or standard usb  connection like the AC6 does. I found a
12v, 5 amp power supply for $10 shipped but had 2 wait 2 weeks to get it from China, plus some minor mods to get it connected.

For less hassle get the Ac6 or for a little less money Dynam has this with ac power included:

http://www.hobbypartz.com/60p-dyc-1003.html


Dlan

[ck122]

fire ball
    thank you  you did answer on the other post i posted it over there because it was not getting anyfor here     thanks again