BSD Racing e 8thscale

[Khraih]

Wait, there is going to be a new Exceed BL buggy right, because I ment call that buggy the MadLightning, not the BSD.

[Khraih]

This is the new Exceed BL buggy right? http://www.nitrorcx.com/exrc1brsufar.html Call it the MadLightning!
The buggy looks so cool, but if only it had threaded shocks.

[mc4798]

This is the new Exceed BL buggy right? http://www.nitrorcx.com/exrc1brsufar.html Call it the MadLightning!
The buggy looks so cool, but if only it had threaded shocks.

Thats what I am hoping 

Threaded shocks or not, That is the buggy I want to race this spring.

[IFlyLow]

mad series is only for NANDA products.

The BSD is a nice buggy, but personally i like how the nandas are built.

[IFlyLow]

Mad lightning is actually a pretty fitting name haha. I should propose that name for you khraih!

sorry dont have any spy photos. Other guys handle the photography, maybe i can sneak some with camera on my phone lol

[zeo 1]

as far as i know there cast aluminum , easy way to strengthin those up  put them in an oven for 30 minutes then cool um bam insta strength but agreed

[robot]

<a href="http://www.youtube.com/watch?v=F_l3F488ASY" target="_blank">http://www.youtube.com/watch?v=F_l3F488ASY</a>

[IFlyLow]

and................its here! http://www.nitrorcx.com/52c69-re-madbash-aplhablue.html

[mc4798]

and................its here! http://www.nitrorcx.com/52c69-re-madbash-aplhablue.html

Please give us some more info.   

I would prefer info on the brushless buggy along with pics would be awesome 

[madbrett]

come on we need some info?

[IFlyLow]

Sorry working on some videos.

Brushless buggy MADFIRE EP: Brushless 540L motor KV 2150, 80Amp XERUN hobbywing ESC wired in series, 7.4v 3300mah 20c discharge batteries to put out approx 14.8 volts. sealed front cetner and rear diffs with silicon fluid, you can use different weights. I like to use thicker weights for the center diff because of the instant torque these elec motors push out. 5k front 7k center and 5k rear is good. 16mm big bore shocks aluminum and adjustable with the rubber thing to protect the shafts. 4mm thick shock towers, 3mm thick chassis plate. Racing edition comes with the aluminum goodies such as steering linkage, chassis brace, steering top plate, and front and rear suspenions arm plates. Teh regular edition would feature plastic parts. OH the esc is programmable via the button or the hobbywing program card. front CVD driveshafts. full ball bearings, shaft driven 4wd...

The MADBASH is same as buggy just shock tower, body posts, tires, and other small parts are different i will have to take closer look.

[mc4798]

Sorry working on some videos.

Brushless buggy MADFIRE EP: Brushless 540L motor KV 2150, 80Amp XERUN hobbywing ESC wired in series, 7.4v 3300mah 20c discharge batteries to put out approx 14.8 volts. sealed front cetner and rear diffs with silicon fluid, you can use different weights. I like to use thicker weights for the center diff because of the instant torque these elec motors push out. 5k front 7k center and 5k rear is good. 16mm big bore shocks aluminum and adjustable with the rubber thing to protect the shafts. 4mm thick shock towers, 3mm thick chassis plate. Racing edition comes with the aluminum goodies such as steering linkage, chassis brace, steering top plate, and front and rear suspenions arm plates. Teh regular edition would feature plastic parts. OH the esc is programmable via the button or the hobbywing program card. front CVD driveshafts. full ball bearings, shaft driven 4wd...

The MADBASH is same as buggy just shock tower, body posts, tires, and other small parts are different i will have to take closer look.

Thanks. Look great and will be ordering one soon.

Is this the same buggy as BD8E ? If so will you be getting the carbon fiber shock towers ?

[IFlyLow]

It looks indentical to the bd8e. Actually its the same as the madfire ep. The madfire ep racing edition has all the aluminum parts that the bd8e didnt have. IE alum 16mm big bore shocks, alum chassis plate, top plate, etc etc

[mc4798]

It looks indentical to the bd8e. Actually its the same as the madfire ep. The madfire ep racing edition has all the aluminum parts that the bd8e didnt have. IE alum 16mm big bore shocks, alum chassis plate, top plate, etc etc

Sounds great. I did notice all of the aluminum and big bore shocks the other buggy didnt have.

I am glad you guys upgraded the Madfire EP with all the aluminum parts. I look forward to adding one soon.

Now if I could get these part # for my madspeed.
MAD-NH3088
MAD-NH3089
MAD-NH3097
MAD-NH3113
Sorry had to plug that in there 

[mc4798]

Here would be a nice place for a video shoot for the madfire ep and madbash

http://www.youtube.com/watch?v=UH84cfgd4bo&feature=channel