question on my heli

[btw43]

The bottom blades on my heli are rubbing against the body of the heli. What should I do to fix it?

[iDuke]

What heli is?

[btw43]

It's the Colco Airwolf (Bell 222)

[helikido]

is it rubbing on the canopy, if so trim it.

[btw43]

how do you trim it. I am all new to this.

[helikido]

as far as i know triming a canopy is not hard, don't worry i'm a nube too. just get sizzors and cut it from top were the piont it will not bind with the blades. before you do that take of your canopy and see if it still fly's.

[btw43]

what am i supposed to cut?

[helikido]

just one thing, what heli do you have so that i can tell you. it's not hard. it's like cutting paper. if you don't know what heli you have got the canopy from up top and keep going until it does not bind with the rotors. don't go too for to cut it were the canopy holders are.

[btw43]

i have the colco airwolf

[helikido]

bummer, the hole heli is the canopy. try to tighten the canopy all the way down or push it all the way down, tell me what happens. ive got another idea but i'll hold it for now.

[btw43]

i tried that and it didnt work, what is your other idea

[helikido]

my idea will apply depending your answer, first tell me were the rotors hit the body so you cut the right piece.

[btw43]

if you know what it looks like, it is the part were the holes are on the top, its the last row of holes closet to the tail

[helikido]

what ive been thinking is to cut that part of, then trim a little and super glue it back on if you get the idea. if you got it from xheli try to contact andy and he will give you a new canopy if your under warranties. i don't have this heli so im still thinking things up. i hope someone else butt's in this topic to help out.

[btw43]

so cut the part off that the blades are rubbing on?