{ VIDEOS } - Exceed Raptor G2 (Post all G2 videos here)

[McKrackin]

kv's don't make power.Just RPM's.

You can try something like this...

http://www.helisreadytofly.com/product_info.php?cPath=14_59&products_id=262&osCsid=6aee5201db95f5820e1bd46cae0fe362

That would get more power

[chris.7935]

To be honest the alpha 400 xheli sells is more than enough power for the G2. Don't know what you would need more than that for. (you trying to carry bricks to your roof?)

[WC_WICKEDCLOWN]

To be honest the alpha 400 xheli sells is more than enough power for the G2. Don't know what you would need more than that for. (you trying to carry bricks to your roof?)

well if you guys think its ok like it is , i have a 3500v brushless motor.

i ordered a Thunder AC6 Smart LiPo Balance Charger/Discharger w/ AC Adapter
and im ordering a 1750mah 25c lipo thats suppose to fit .

[McKrackin]

That combo should be more than enough.

[chivone]

I liked your videos. They are very informative. However, I have one small problem. You know the video where you are checking the controls for the rear rotor blades? When you turn the throttle to the right, the rear blades pitch out to the right, and stay there. And vice versa for the left.  My problem is this. When I do that, my rotor blades squeeze back to the center, they don't stay to the right like yours do.  Same thing when I turn to the left, they slowly slip back to center with no input from me.

Is it a bad servo, or a bad gyro?  I'm stumped, and don't want to spend money on the wrong thing.
I appreciate any help you can give me, because this heli spins around like crazy, all by itself. Something is going on with the tail.
Thanks again.